Caution: Do not strike or jolt the inflatable restraint side impact sensor (SIS). Before applying power to the SIS make sure that it is securely fastened. Failure to observe the correct installation procedures could cause SIR deployment, personal injury, or unnecessary SIR system repairs.

Caution: Refer to SIR Caution in the Preface section.

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.

Preliminary Procedure

1. Disable the SIR system. Refer to SIR Disabling and Enabling.
2. Remove the front door panel. Refer to Front Side Door Trim Panel Replacement.

1

Bolt/Screw, Inflatable Restraint Side Impact Sensor Assembly (Qty: 2)

Tip
Loosen the fasteners and slide the sensor out of the keyhole slots.

Tighten
10 N·m (89 lb in)

2

Sensor Assembly, Inflatable Restraint Side Impact