GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Impala 🢒 Body 🢒 Doors 🢒 Front Side Door Window Channel Retainer Replacement

Front Side Door Window Channel Retainer Replacement Monte Carlo

Removal Procedure

    Object Number: 631153 Size: SH
  1. Remove the outside rearview mirror. Refer to Power Mirror Replacement .
  2. Pull down the door window channel in order to gain access to the rivets.
  3. Loosen the front door frame applique screws. Refer to Front Side Door Window Frame Rear Applique and Outer Weatherstrip Replacement .
  4. Remove the front door window channel retainer screw.
  5. Remove the front door window channel retainer from the front door.

Installation Procedure

    Object Number: 631153 Size: SH
  1. Position the front door window channel retainer to the front door.
  2. Install the front door window channel retainer rivets.
  3. Tighten the front door frame applique screws. Refer to Front Side Door Window Frame Rear Applique and Outer Weatherstrip Replacement .
  4. Install the front door window weather-strip in position.
  5. Install the outside mirror. Refer to Power Mirror Replacement .

Front Side Door Window Channel Retainer Replacement Impala


Object Number: 1649315 Size: MF

Callout

Component Name

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications Refer to Fastener Tightening Specifications .

Preliminary Procedures

  1. Remove the interior trim panel. Refer to Front Side Door Trim Panel Replacement .
  2. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement .
  3. Remove the inside sealing strip. Refer to Front Side Door Window Belt Inner Sealing Strip Replacement .

1

Front Door Weatherstrip Seal Retainer Bolt

Tighten
10 N·m (89 lb in)

2

Front Door Weatherstrip Seal Retainer Rivets (Qty: 7)

Tip
Drill out the rivets from around the upper door frame.

3

Front Door Weatherstrip Seal Retainer

Tip
Pull the weatherstrip retainer upward, slightly twisting weatherstrip retainer to clear the outer sealing strip.