GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Impala 🢒 Body 🢒 Doors 🢒 Rear Side Door Lock Actuator Replacement

Removal Procedure
  1. Remove the rear door lock. Refer to Rear Door Lock Replacement

    2. Object Number: 757246 Size: SH
  2. Remove the rear door lock to rear door lock actuator screws.
  3. Remove the rear door actuator from the rear door lock.

Installation Procedure

    Object Number: 757246 Size: SH
  1. Align the rear door actuator to the rear door lock.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the rear door lock to rear door actuator screws.

    3. Tighten
    Tighten the rear door actuator screws to 2 N·m (18 lb in).

  3. Install the rear door lock. Refer to Rear Door Lock Replacement