GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Impala 🢒 Body 🢒 Doors 🢒 Front Side Door Lock Actuator Replacement

Removal Procedure
  1. Remove the front door lock. Refer to Front Side Door Lock Replacement

    2. Object Number: 757246 Size: SH
  2. Remove the front door lock to front door lock actuator screws.
  3. Remove the front door actuator from the front door lock.

Installation Procedure

    Object Number: 757246 Size: SH
  1. Align the front door actuator to the front door lock.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the front door lock to front door actuator screws.

    3. Tighten
    Tighten the front door actuator screws to 2 N·m (18 lb in).

  3. Install the front door lock. Refer to Front Side Door Lock Replacement