Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Position window approximately half way down in the door.
2. Remove the interior trim panel. Refer to Rear Side Door Trim Panel Replacement .
3. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
4. Tape the window to door frame to prevent it from moving.
5. Remove the inside sealing strip. Refer to Rear Side Door Window Inner Sealing Strip Replacement .
6. Remove the rear door window weatherstrip. Refer to Rear Side Door Window Channel Replacement .

1

Rear Side Door Window to Regulator Bolts (Qty: 2)

Tighten
10 N·m (89 lb in)

2

Rear Side Door Window

Tip

1. Slide the window up and install the two bolts which hold the rear door window to the window regulator.
2. Remove the tape.