Caution: Refer to SIR Caution in the Preface section.

Preliminary Procedures

1. Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling .
2. Remove the upper air baffle and deflector. Refer to Radiator Air Upper Baffle and Deflector Replacement .
3. Remove both headlamps. Refer to Headlamp Replacement .
4. Remove the fascia grille support bolts, 8 total. DO NOT remove the bumper fascia. Refer to Front Bumper Fascia Energy Absorber Replacement .
5. Remove the retainers from fascia to grille support, 4 total.
6. Pull the grille support forward to gain clearance to the sensors.

1

Inflatable Front End Sensor Mounting Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
11 N·m (97 lb in)

2

Connector Position Assurance (CPA) Connector

3

Inflatable Front End Sensor