Front Seat Heater Control Module Replacement. Chevrolet Impala 2006

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2006 🢒 Impala 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Front Seat Heater Control Module Replacement

Front Seat Heater Control Module Replacement Impala

Callout	Component Name
Notice: Refer to Fastener Notice in the Preface section. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Remove the front seat. Refer to Front Seat Replacement - Bucket . Remove the front seat adjuster. Refer to Front Seat Adjuster Replacement .
1	Screw, Front Seat Heater Control Module (Qty: 2) Tighten 2 N·m (18 lb in)
2	Module, Front Seat Heater Control Refer to Control Module References for programming and setup information. Tip Disconnect the electrical connector.

Callout

Component Name

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Screw, Front Seat Heater Control Module (Qty: 2)

Tighten
2 N·m (18 lb in)

Module, Front Seat Heater Control

Refer to Control Module References for programming and setup information.

Tip
Disconnect the electrical connector.

Callout	Component Name
Notice: Refer to Fastener Notice in the Preface section. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Disable the SIR system if working on the passenger seat. Refer to SIR Disabling and Enabling and SIR Disabling and Enabling . Remove the front seat. Refer to Front Seat Replacement - Bucket . Remove the front seat adjuster. Refer to Front Seat Adjuster Replacement .
1	Nut, Front Seat Heater Control Module (Qty: 2) Tighten 3 N·m (25 lb in)
2	Module, Front Seat Heater Control Refer to Control Module References for programming and setup information. Tip Disconnect the electrical connector.