GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2004 🢒 Impala 🢒 Preface 🢒 Cautions and Notices 🢒 Remote Control Door Lock Receiver Replacement

Removal Procedure

    Object Number: 443682 Size: SH
  1. Remove the instrument panel (IP) upper trim panel. Refer to Instrument Panel Upper Trim Panel Replacement in Instrument Panel, Gages and Console.
  2. Disengage the receiver retainers from the IP upper trim pad.
  3. Disconnect the receiver electrical connector.
  4. Remove the receiver.

Installation Procedure

    Object Number: 443682 Size: SH
  1. Connect the electrical connector.
  2. Engage the receiver retainers to the IP upper trim pad.
  3. Install the IP upper trim panel. Refer to Instrument Panel Upper Trim Panel Replacement in Instrument Panel, Gages and Console.
  4. If a new remote control door lock receiver is being installed, program the transmitter. Refer to Transmitter Programming .