For 1990-2009 cars only
Removal Procedure
- Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Remove the left wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
- Remove the left front fender liner. Refer to Front Fender Liner Replacement in Body Front End.
- Loosen the AIR exhaust pipe hose pinch clamp.
- Disconnect the AIR exhaust hose from the AIR pump.
- Disconnect the AIR pump electrical connector.
- Remove the bolts securing the AIR pump bracket to the frame.
- Remove the AIR pump and bracket as an assembly.
Installation Procedure
- Secure the AIR pump and bracket to the Frame mount with the nuts.
- Connect the AIR pump electrical connector.
- Lightly lubricate inner edge of AIR exhaust hose.
- Attach the AIR exhaust hose to the AIR pump outlet port.
- Place the AIR exhaust hose pinch clamp around the AIR pump outlet port and exhaust hose connection.
- Install the left front fender liner. Refer to Front Fender Liner Replacement in Body Front End.
- Install the left wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
- Lower the vehicle.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the bolts securing the AIR pump mounting bracket to 50 N·m
(37 lb ft).
