Tools Required

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.



2. Remove the left engine mount strut and the bracket from the upper radiator support. Refer to Engine Mount Strut Bracket Replacement - Upper .
3. Assemble the J-28467-501  (2) to the J 28467-B cross bar (1).
4. Install the J 28467-B  (1) and the J-28467-501  (2) to the fender rails.



5. Install the J 36462-A  (1) to the cross bar (2).



6. Install the support lift hook (1) to the cross bar (2).
7. Install the support hook (1) to the right engine lift hook (3).



8. Install the support hook (1) to the J 36462-A  (2).
9. Install the support hook (1) to the left engine lift hook (3).



10. Raise the engine to release the pressure off of the engine mounts.