A power sunroof (CF5 option) is available with the following features:
• | A sliding window panel |
• | A manually operated sunshade |
The power sunroof will operate with the ignition switch in ACCY, RUN and in Retained Accessory Power (RAP). For more information on RAP refer to Retained Accessory Power (RAP) Operation in Retained Accessory Power. The power sunroof is electrically operated from a 2 position rocker type switch. The rocker type switch is located in the center of the windshield header area. The sunroof has both manual and express features for operating the sliding glass. The sunroof glass may be moved by switch control to any of the following positions:
• | Express open |
• | Fully close |
• | Vent |
To open the power sunroof, press the sunroof switch rearward twice and the glass and sunshade will slide fully open. During this operation the sunroof switch can be pressed in either direction to stop the glass in a desired position.
To close the power sunroof, press and hold the sunroof switch forward until the sunroof motor stops at the fully closed position or until a desired position is reached. To close the sunshade this will have to manually slide forward.
This feature can only be done with the sunroof in the fully closed position. To open the power sunroof to vent position, press the sunroof switch rearward once and the glass move to the vent position. From the vent position you can slide the glass in either express open or to the close position.