Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Diagnostic System Check for the Retained Accessory Power (RAP) system? | -- | Go to Step 2 | |
2 | Verify the fault is present. Does the system operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Do the sunroof and the power windows operate? | -- | Go to Step 4 | Go to Step 6 |
4 | Test for a short to battery in the power windows and sunroof feed circuit. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 10 | Go to Step 5 |
5 | Replace the LH IP Accessory Wiring Junction Block. Refer to LH IP Accessory Wiring Junction Block replacement in Instrument Panel, Gauges and Console. Did you complete the replacement? | -- | Go to Step 10 | -- |
6 |
Does the test lamp illuminate? | -- | Go to Step 8 | Go to Step 7 |
7 | Replace the RAP relay. Did you Complete the replacement? | -- | Go to Step 10 | -- |
8 | Test the RAP relay coil feed control circuit for a short to voltage. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 10 | Go to Step 9 |
9 |
Did you complete the replacement and the set up procedure? | -- | Go to Step 10 | -- |
10 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
