Instrument Panel Air Outlet Vent Replacement Monte Carlo Center

1. Remove the instrument panel (I/P) cluster trim plate. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages, and Console.



2. Use a small flat-bladed tool and pry the upper and lower retainers of the I/P air outlet deflector.



3. Lift out the deflector from the I/P cluster trim plate.

1. Position the air outlet deflector to the upper retainer tabs on the I/P cluster trim plate.
2. Position the deflector to the lower retainer tabs on the I/P cluster trim plate.



3. Install the deflector to the trim plate by pressing into place until the retainers are fully seated.
4. Inspect the deflector for proper operation.
5. Install the I/P cluster trim plate. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages, and Console.