GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2000
🢒
Impala
🢒
Body and Accessories
🢒
Wiring Systems
🢒 Fuel Level Sensor Replacement
Removal Procedure
Important:
Always maintain cleanliness when servicing fuel system components.
Relieve fuel system pressure. Refer to
Fuel Pressure Relief
.
Remove the modular fuel sender assembly. Refer to
Fuel Sender Assembly Replacement
.
Remove the fuel level sensor (5) from the modular fuel sender.
Installation Procedure
Install the fuel level sensor (5) to modular fuel sender.
Reinstall the fuel sender assembly. Refer to
Fuel Sender Assembly Replacement
.
Tighten the fuel fill cap.
Connect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
in Engine Electrical.
Inspect for fuel leaks.
5.1.
Turn ON the ignition, for 2 seconds.
5.2.
Turn OFF the ignition, for 10 seconds.
5.3.
Turn ON the ignition.
5.4.
Inspect for fuel leaks.
Install the fuel injection sight shield. Refer to
Fuel Injector Sight Shield Replacement
in Engine Mechanical.