Was the Diagnostic System Check -Tire Pressure Monitor performed?

--

Go to Step 2

Go to Diagnostic System Check - Tire Pressure Monitoring

1. Turn the ignition switch to RUN.
2. Observe LOW TIRE indicator in the instrument panel.

Does the indicator turn on for approximately 3 seconds and then turn off?

--

System OK

Go to Step 3

Replace the I/P Cluster. Refer to Instrument Cluster Replacement in Instrument Panel, Gauges and Console.

Did you complete the replacement?

--

Go to Step 4

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to DTC C1245 Low Tire Pressure Detected