Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Remove the liftgate trim panel. Refer to Liftgate Trim Panel Replacement.
2. Remove the rear wiper arm assembly. Refer to Rear Window Wiper Arm Replacement.

1

Bolt, Rear Window Wiper Motor (Qty: 3)

Tighten
5 N·m (44 lb in)

2

Seal, Rear Window Wiper Pivot Shaft

3

Motor Assembly, Rear Window Wiper

Tip
Pull motor rearward to access washer hose and electrical connections, lower motor into liftgate and remove from exterior pivot shaft seal.