Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .

1

Front Fascia Retainers (Qty: 4)

Tip
Carefully push a small nylon wedge between the fascia and the fender. Insert a small screwdriver into the fascia slot and depress the snaps one at a time and pull on the fascia at the same time to gradually remove the fascia from the bracket.

2

Front Fascia Retainers (Qty: 2)

Tip
Carefully push a small nylon wedge between the fascia and the fender. Insert a small screwdriver into the fascia slot and depress the snaps one at a time and pull on the fascia at the same time to gradually remove the fascia from the bracket.

3

Front Fascia Screws (Qty: 2)

Tighten
10 N·m (89 lb in)

4

Front Fascia

Tip