Callout
| Component Name
|
Preliminary Procedure
- Disable the SIR system. Refer to
SIR Disabling and Enabling
.
- Remove the console. Refer to
Console Replacement
.
- Fully release the park brake lever.
|
1
| Park Brake Warning Lamp Switch Electrical Connector
Tip
Ensure that the connector is located to the side. |
2
| Park Brake Cable Adjusting Nut
Tip
| • | Use ONLY HAND TOOLS when loosening or tightening the adjusting nut |
| • | Loosen the nut enough to completely relieve tension on the front cable. |
|
3
| Rear Park Brake Cables
Tip
Release the rear cable ends from the cable equalizer. |
4
| Park Brake Lever Retaining Nuts (Qty: 4)
Notice: Refer to Fastener Notice in the Preface section.
Tighten
25 N·m (18 lb ft) |
5
| Floor Console Bracket
|
6
| Rear Park Brake Cable Guide Tubes
Tip
Release the rear cable guide tube ends from the park brake lever. |
7
| Park Brake Lever Assembly
Tip
Adjust the park brake. Refer to
Park Brake Adjustment
. |
