Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Remove the forward portion of either the LF or RF wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .
2. Disconnect the fog lamp bulb electrical connector.

1

Lamp Assembly, Front Fog

Tip

1. Release the rearward edge of the front bumper fascia from the locking ring on the front fog lamp assembly.
2. Pull the fog lamp assembly rearward out from the inside of the front bumper fascia.

2

Bulb Assembly, Front Fog Lamp

Caution: Refer to Halogen Bulb Caution in the Preface section.

Tip
Turn the bulb socket a quarter turn counterclockwise in order to remove.