Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the wheel. Refer to Tire and Wheel Removal and Installation.
3. Remove the rear brake drum. Refer to Brake Drum Replacement.

1

Rear Wheel Bearing/Hub Nuts (Qty: 4)

Tip
Disconnect the electrical connector from the wheel bearing/hub, if equipped.

Tighten
45 N·m (33 lb in) plus 30 ° rotation.

2

Rear Wheel Bearing/Hub

Tip
Pull the wheel bearing/hub from the axle.