Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Remove the rear seat. Refer to Rear Seat Replacement .
2. Remove the right rear quarter lower trim panel. Refer to Quarter Lower Rear Trim Panel Replacement .

1

Screw, Quarter Inner Trim Panel Bracket (Qty: 4)

Tighten
10 N·m (89 lb in)

2

Bracket, Quarter Inner Trim Panel

3

Nut, Communication Interface Module (Qty: 3)

Tighten
10 N·m (89 lb in)

4

Module, Communication Interface

Tip

1. Disconnect the electrical connector.
2. Reprogram the communication Interface module after installation. Refer to Control Module References .