Notice: In order to avoid cluster lens damage, DO NOT grasp the lens to remove the cluster.

Preliminary Procedure

Remove the instrument panel cluster trim bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .

1

Instrument Panel Cluster Screw (Qty: 2)

Tighten
2 N·m (18 lb in)

2

Instrument Panel Cluster Assembly

Refer to Control Module References for programming and setup information.

Tip
Disconnect the electrical connector.

3

Retainer Clip (Qty: 1)

Tip
Remove the cluster by grasping the ridge about 13 mm (0.50 in) back from the lens.