Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Remove the front floor console. Refer to Front Floor Console Replacement
2. Disconnect the shift cable from the shift control. Refer to Floor Shift Control Cable Replacement .

1

Instrument Panel Center Support Bracket

Refer to Instrument Panel Center Support Bracket Replacement .

Tip
Disconnect the shift lock solenoid electrical connector.

2

Shift Control Nut (Qty: 4)

Tighten
10 N·m (89 lb in)

3

Shift Control Bolt (Qty: 4)

4

Shift Control