Tools Required

J 34730-1A Fuel Pressure Gage

Caution: Remove the fuel tank cap and relieve the fuel system pressure before servicing the fuel system in order to reduce the risk of personal injury. After you relieve the fuel system pressure, a small amount of fuel may be released when servicing the fuel lines, the fuel injection pump, or the connections. In order to reduce the risk of personal injury, cover the fuel system components with a shop towel before disconnection. This will catch any fuel that may leak out. Place the towel in an approved container when the disconnection is complete.

1. Turn the ignition OFF.
2. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
3. Install the J 34730-1A . Refer to Fuel Pressure Gage Installation and Removal.
4. Loosen the fuel fill cap in order to relieve the fuel tank vapor pressure.
5. Open the valve on the J 34730-1A in order to bleed the fuel system pressure. The fuel connections are now safe for servicing.
6. Place a shop towel under the fuel pressure service port in order to catch any remaining fuel spillage.
7. Once the system pressure is completely relieved, remove the J 34730-1A .