Tools Required
• |
J 28467-B
Universal Engine Support Fixture |
• | J 41602
Body Protection Hoist Adapter Set |
Installation Procedure
- Remove the air cleaner assembly. Refer to
Air Cleaner Assembly Replacement
.
- Install the
J 41602
(1) to the fender pinch welds as far forward as posible.
- From the
J 28467-B
, place the J 28467-4A (2) across the engine compartment on top of the
J 41602
(1).
- From the
J 28467-B
, install the J 28467-8A hook to the J 28467-6A
bracket, and install the J 28467-34 wing nut and washer.
- Repeat the previous step in order to assemble two lift hooks and brackets.
- Place the hook on J 28467-8A (1) through the engine lift
bracket on the engine, and set the J 28467-6A (3) onto the J 28467-4A (4)
- Place the
J 36462-A
(1) onto the J 28467-4A.
- Place the J 28467-4A (2) in the corner of the core support.
- Install the J 28467-1A bracket (3) where the
J 36462-A
(1) and the J 28467-4A intersect.
- Hand tighten the J 28467-1A bracket wing nuts.
- Install the second hook and bracket assembly to the
J 36462-A
(1) and install the hook to the engine lift bracket.
- Prior to lifting and/or supporting the engine, ensure that the lift hooks do not interfere with any adjacent
components.
Removal Procedure
- Remove the hook from the engine lift bracket and remove the hook and bracket assembly from the
J 36462-A
(1).
- Loosen the J 28467-1A bracket wing nuts.
- Remove the J 28467-1A bracket (3) from where the
J 36462-A
(1) and the J 28467-4A intersect.
- Remove the
J 36462-A
(1).
- Remove the hook on J 28467-8A (1) from the engine lift bracket
on the engine, and remove the J 28467-6A (3) from the J 28467-4A (4)
- Remove the J 28467-34 wing nut and washer, and remove the J 28467-8A hook from the J 28467-6A
bracket.
- Repeat the previous step in order to disassemble the 2 lift hooks and brackets.
- Remove the J 28467-4A (2) from across the engine compartment.
- Remove the
J 41602
(1) from the fender pinch welds.
- Install the air cleaner assembly. Refer to
Air Cleaner Assembly Replacement
.