GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Express 🢒 Power and Signal Distribution 🢒 Wiring Systems and Power Management 🢒 Hazard and Turn Signal Flasher Replacement

Removal Procedure

    Object Number: 895364 Size: SH
  1. Remove the left knee bolster bracket. Refer to Driver Knee Bolster Bracket Replacement.
  2. Remove the turn/hazard flasher (2) from the instrument panel (I/P) support.
  3. Disconnect the electrical connector (1).
  4. Remove the turn/hazard flasher (2).

Installation Procedure

    Object Number: 895364 Size: SH
  1. Connect the electrical connector (1) to the turn/hazard flasher (2).
  2. Install the turn/hazard flasher (2) to the instrument panel (I/P) support.
  3. Install the left knee bolster bracket. Refer to Driver Knee Bolster Bracket Replacement.