Driver or Passenger Seat Recliner Handle Replacement All Except Luxury

1. Remove the recliner handle cover (4) from the recliner mechanism (2).
2. Remove the screw that retains the recliner handle (3) to the recliner mechanism.
3. Remove the recliner handle from the recliner mechanism.

1. Install the recliner handle (3) to the recliner mechanism (2).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the screw that retains the recliner handle to the recliner mechanism.

Tighten
Tighten the screws to 2.5 N·m (23 lb in).

3. Install the recliner handle cover (4) to the recliner mechanism.