Removal Procedure
- Remove the rear door trim panel. Refer to
Rear Door Trim Panel Replacement
in Body Rear End.
Caution: Eye protection must be worn when drilling rivets to reduce
the chance of personal injury.
- Remove the rivets retaining the rear door speaker/housing to the door
using appropriate drill and drill bit.
- Remove the speaker/housing from the door.
- Disconnect the electrical connector from the speaker.
Installation Procedure
- Connect the electrical
connector to the speaker.
- Install the speaker/housing to the door.
- Install the rivets in order to retain the rear door speaker/housing
to the door.
- Install the rear door trim panel. Refer to
Rear Door Trim Panel Replacement
in Body Rear End.