GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Express 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Latch Control Handle Replacement

Removal Procedure
  1. Remove the side rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .

    2. Object Number: 333986 Size: SH
  2. Disconnect the lock rods (3) from the side rear door latch handle (4).
  3. Remove the nuts (2) that retain the side rear door latch handle (4) to the side rear door.
  4. Remove the side rear door latch handle (4) from the door.

Installation Procedure

    Object Number: 333986 Size: SH
  1. Install the side rear door latch handle (4) to the door.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the nuts (2) that retain the side rear door latch handle (4) to the side rear door.

    3. Tighten
    Tighten the bolts to 11 N·m (97 lb in).

  3. Connect the lock rods (3) to the side rear door latch handle (4).
  4. Remove the side rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .