Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the power door locks circuit description and operation and perform the necessary inspections? | -- | Go to Step 2 | Go to Symptoms |
2 | Verify the fault is present. Does the system operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Does the rear power door lock switch perform only the unlock operation? | -- | Go to Step 4 | Go to Step 5 |
4 |
Is continuity present? | -- | Go to Step 8 | Go to Step 9 |
5 | Does the rear power door lock switch perform only the lock operation? | -- | Go to Step 6 | Go to Step 7 |
6 |
Is continuity present? | -- | Go to Step 10 | Go to Step 9 |
7 |
Does the test lamp light? | -- | Go to Step 9 | Go to Step 11 |
8 | Repair the open in CKT 195 (LT BLU) between splice S241 and the rear power door lock switch. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 12 | -- |
9 | Replace the rear power door lock switch. Refer to Door Lock Switch Replacement . Is the repair complete? | -- | Go to Step 12 | -- |
10 | Repair the open in CKT 194 (WHT) between splice S242 and the rear power door lock switch. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 12 | -- |
11 | Repair the open in CKT 540 (ORN) between splice S228 and the rear power door lock switch. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 12 | -- |
12 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
