Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the Heated Mirror circuit description and operation and perform the necessary inspections? | -- | Go to Step 2 | Go to Symptoms |
2 | Verify the fault is present. Does the system operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Are both heated mirrors inoperative? | -- | Go to Step 17 | |
4 |
Is continuity present? | -- | Go to Step 6 | Go to Step 5 |
5 | Repair the open in CKT 150 (BLK) between splice S206 and ground G200, refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 28 | -- |
6 |
Does the test lamp light? | -- | Go to Step 7 | Go to Step 8 |
7 | Repair the open in CKT 267 (ORN) between the convenience center and splice S245, refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 28 | -- |
8 |
Is continuity present? | -- | Go to Step 10 | Go to Step 9 |
9 | Repair the open in CKT 267 (ORN) between the heater and A/C controller connector and the convenience center, refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 28 | -- |
10 | Connect an J 35616-200 unpowered test lamp between the heater and A/C controller connector C3, cavity A CKT 1440 (ORN), and a known good ground. Does the test lamp light? | -- | Go to Step 12 | Go to Step 11 |
11 | Repair the open in CKT 1440 (ORN) between the IP fuse block and the heater and A/C controller, refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 28 | -- |
12 |
Does the test lamp light? | -- | Go to Step 14 | Go to Step 13 |
13 | Repair the open in CKT 141 (BRN) between the IP fuse block and the heater and A/C controller, refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 28 | -- |
14 | Connect a J 39200 digital multimeter between the heater and A/C controller connector C3, cavity C, and a known good ground. Is continuity present? | -- | Go to Step 16 | Go to Step 15 |
15 | Repair the open in CKT 150 (BLK) between the heater and A/C controller and ground G201, refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 28 | -- |
16 | Replace the heater and A/C controller, refer to Control Assembly Replacement in HVAC Manual. Is the repair complete? | -- | Go to Step 28 | -- |
17 | Is the left heated mirror operative? | -- | Go to Step 18 | Go to Step 23 |
18 |
Is continuity present? | -- | Go to Step 20 | Go to Step 19 |
19 | Repair the open in CKT 150 (BLK) between the left power outside rearview mirror and splice S206, refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 28 | -- |
20 |
Does the test lamp light? | -- | Go to Step 22 | Go to Step 21 |
21 | Repair the open in CKT 267 (ORN) between splice S245 and the left power outside rearview mirror, refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 28 | -- |
22 | Replace the left power outside rearview mirror, refer to Power Mirror Replacement . Is the repair complete? | -- | Go to Step 28 | -- |
23 |
Is continuity present? | -- | Go to Step 25 | Go to Step 24 |
24 | Repair the open in CKT 150 (BLK) between the right power outside rearview mirror and splice S206, refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 28 | -- |
25 |
Does the test lamp light? | -- | Go to Step 27 | Go to Step 26 |
26 | Repair the open in CKT 267 (ORN) between splice S245 and the right power outside rearview mirror. Is the repair complete? | -- | Go to Step 28 | -- |
27 | Replace the right power outside rearview mirror refer to Power Mirror Replacement . Is the repair complete? | -- | Go to Step 28 | -- |
28 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
