Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the power mirror circuit description and operation and perform the necessary inspections? | -- | Go to Step 2 | Go to Symptoms |
2 | Verify the fault is present. Does the system operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Is continuity present? | -- | Go to Step 4 | Go to Step 9 |
4 |
Is continuity present? | -- | Go to Step 5 | Go to Step 9 |
5 |
Is continuity present? | -- | Go to Step 6 | Go to Step 9 |
6 |
Is continuity present? | -- | Go to Step 7 | Go to Step 9 |
7 |
Is continuity present? | -- | Go to Step 8 | Go to Step 10 |
8 | Connect a J 39200 digital multimeter between the power outside rearview mirror remote control switch connector, cavity C, and the right power outside rearview mirror connector, cavity E, for CKT 1497 (LT BLU/WHT). Is continuity present? | -- | Go to Step 11 | Go to Step 12 |
9 | Replace the power outside rearview mirror remote control switch. Refer to Power Mirror Switch Replacement . Is the repair complete? | -- | Go to Step 13 | -- |
10 | Repair the open in CKT 1498 (BRN/WHT) between the power outside rearview mirror remote control switch and the right power outside rearview mirror. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 13 | -- |
11 | Replace the right power outside rearview mirror. Refer to Power Mirror Replacement . Is the repair complete? | -- | Go to Step 13 | -- |
12 | Repair the open in CKT 1497 (LT BLU/WHT) between the right power outside rearview mirror connector, cavity E, and splice S604. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 13 | -- |
13 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
