Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the power mirror circuit description and operation and perform the necessary inspections? | -- | Go to Step 2 | Go to Symptoms |
2 | Verify the fault is present. Does the system operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Is continuity present? | -- | Go to Step 4 | Go to Step 9 |
4 |
Is continuity present? | -- | Go to Step 5 | Go to Step 9 |
5 |
Is continuity present? | -- | Go to Step 6 | Go to Step 9 |
6 |
Is continuity present? | -- | Go to Step 7 | Go to Step 9 |
7 |
Is continuity present? | -- | Go to Step 8 | Go to Step 10 |
8 | Connect a J 39200 digital multimeter between the power outside rearview mirror remote control switch connector, cavity H, and the left power outside rearview mirror connector, cavity C, for CKT 1499 (LT GRN). Is continuity present? | -- | Go to Step 11 | Go to Step 12 |
9 | Replace the power outside rearview mirror remote control switch. Refer to Power Mirror Switch Replacement . Is the repair complete? | -- | Go to Step 13 | -- |
10 | Repair the open in CKT 1516 (LT BLU) between the power outside rearview mirror remote control switch and the left power outside rearview mirror. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 13 | -- |
11 | Replace the left power outside rearview mirror. Refer to Power Mirror Replacement . Is the repair complete? | -- | Go to Step 13 | -- |
12 | Repair the open in CKT 1499 (LT GRN) between the left power outside rearview mirror connector, cavity C, and splice S502. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 13 | -- |
13 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
