Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: All instrument panel gauges are inoperative. | ||||
1 | Did you review the instrument cluster circuit description and perform the necessary inspections? | -- | Go to Step 2 | Go to Symptoms |
2 | Start the engine and allow to reach normal operating temperature. Do the engine temperature and the oil pressure gauge indicate normal temperature and pressure? | -- | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 |
Does the test lamp light? | -- | Go to Step 4 | Go to Step 5 |
4 | Connect a J 35616-200 unpowered test lamp between instrument cluster connector cavity B13 for CKT 451 (BLK/WHT)/CKT 551 (TAN/WHT) and instrument cluster connector cavity B17 for CKT 39 (PNK). Refer to Circuit Testing in Wiring Systems. Does the test lamp light? | -- | Go to Step 7 | Go to Step 6 |
5 | Repair the open in CKT 39 (PNK) between splice S216 and the instrument cluster. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 8 | Go to Step 3 |
6 | Repair the open in CKT 451 (BLK/WHT)/CKT 551 (TAN/WHT) between the instrument cluster and ground G101. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 8 | Go to Step 3 |
7 | Replace the instrument cluster. Refer to Instrument Cluster Replacement . Is the repair complete? | -- | Go to Step 8 | Go to Step 3 |
8 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
