Turn Signal Lamp Inoperative - Left Side Front Domestic
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: The left front turn signal is inoperative, but the right front turn signal, the front park lamps, and rear turn signals are operating correctly. | ||||
1 | Review the turn signal operation and perform the necessary inspections. Did you complete the system review and inspection? | -- | Go to Step 2 | Go to Symptoms |
2 | Attempt to operate the left turn signal. Does the system operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Did you replace the lamp bulb? | -- | Go to Step 5 | Go to Step 4 |
4 | Repair the open CKT 14 (LT BLU) between splice S236 and the left front park and turn signal lamp. Did you complete the repair? | -- | Go to Step 5 | -- |
5 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
Turn Signal Lamp Inoperative - Left Side Front Export
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: The left front turn signal is inoperative, but the right front turn signal, and rear turn signals are operating correctly. | ||||
1 | Review the turn signal operation and perform the necessary inspections. Did you complete the system review and inspection? | -- | Go to Step 2 | Go to Symptoms |
2 | Attempt to operate the left turn signal. Does the system operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Did you replace the lamp bulb? | -- | Go to Step 7 | Go to Step 4 |
4 |
Did the test incidate continuity? | -- | Go to Step 6 | Go to Step 5 |
5 | Repair the open CKT 150 (BLK) between the lamp connector and ground. Did you complete the repair? | -- | Go to Step 7 | -- |
6 | Repair the open CKT 14 (LT BLU) between splice S236 and the left front turn signal lamp connector. Did you complete the repair? | -- | Go to Step 7 | -- |
7 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
