Tools Required

J 39529 Heater Hose Pliers

1. Drain the engine coolant. Refer to Cooling System Draining and Filling in Engine Cooling.



2. Remove the hose clamps from the outlet pipe and the inlet pipe using the J 39529 .



3. Disconnect the heater inlet pipe and the outlet pipe from the by-pass valve(s).
4. Remove the by-pass valve (3) from the vehicle.

1. Install the bypass valve (3) into the vehicle.
2. Connect the heater inlet pipe and the outlet pipe to the bypass valve(s).



3. Install the hose clamps using the J 39529 .
4. Fill the engine coolant. Refer to Cooling System Draining and Filling in Engine Cooling.
5. Verify that the system has no leaks.