GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Express 🢒 Steering 🢒 Power Steering System 🢒 Power Steering Fluid Reservoir Outlet Hose Replacement

Removal Procedure

    Notice: Do not start the vehicle with any power steering gear inlet or outlet hoses disconnected. When disconnected, plug or cap all openings of components. Failure to do so could result in contamination or loss of power steering fluid and damage to the system.


    Object Number: 309295 Size: SH
  1. Siphon the power steering fluid from the reservoir.
  2. Disconnect the hose (3) from the pump (2).
  3. Disconnect the hose (3) from the reservoir.
  4. Remove the hose from the vehicle.

Installation Procedure

    Object Number: 309295 Size: SH
  1. Install the hose (3) to the power steering pump.
  2. Install the hose to the power steering reservoir (1).

    3. Make sure the clamps are positioned at the end of the hose

  3. Fill the power steering reservoir with fluid. Refer to Checking and Adding Power Steering Fluid .
  4. Bleed the power steering system. Refer to Power Steering System Bleeding .