Preliminary Procedures

Remove the Rear Wheelhouse liner. Refer to Rear Wheelhouse Panel Liner Replacement

1

Rear Bumper Upper Fascia Bolts (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
6 N·m (53 lb in)

2

Rear Bumper Fascia to Fender Screws (Qty: 2)

Tighten
2 N·m (18 lb in)

3

Plastic Push Pin Retainers (Qty: 4)

4

Rear Bumper Fascia

Procedure

1. Disconnect any electrical connectors as needed.
2. Pull gently on the sides of the rear bumper fascia to disengage from the rear quarter panels.
3. Transfer any parts as needed.