GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Equinox 🢒 Body 🢒 Exterior Trim 🢒 Liftgate Lower Molding Replacement

Removal Procedure

    Object Number: 1384372 Size: SH
  1. Remove the liftgate trim panel. Refer to Liftgate Trim Panel Replacement .
  2. Remove the nuts that secure the liftgate molding to the liftgate.
  3. Remove the bolt that secures the liftgate molding to the liftgate.
  4. Remove the molding from the liftgate by pulling away from the liftgate to disengage the remaining retainers.

Installation Procedure

    Object Number: 1384372 Size: SH
  1. Position the liftgate molding to the liftgate and push in to secure retainers.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the nuts that secure the liftgate molding to the liftgate.

    3. Tighten
    Tighten the nuts to 2 N·m (18 lb in).

  3. Install the bolt that secures the molding to the liftgate.

    4. Tighten
    Tighten the bolt to 2 N·m (18 lb in).

  4. Install the liftgate trim panel. Refer to Liftgate Trim Panel Replacement .