GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Equinox 🢒 Body 🢒 Body Rear End 🢒 Liftgate Bumper Replacement

Removal Procedure
  1. Open the liftgate.

    2. Object Number: 1378634 Size: SH
  2. Remove the tail lamp. Refer to Tail Lamp Assembly and /or Backup, Sidemarker, Stop, Turn Signal Bulb Replacement in Lighting Systems.
  3. Remove the liftgate bumper bolts.
  4. Remove the bumper.

Installation Procedure

    Object Number: 1378634 Size: SH
  1. Position the liftgate bumper on the liftgate.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the bumper bolts.

    3. Tighten
    Tighten the bumper bolts to 8 N·m (71 lb in).

  3. Install the tail lamp. Refer to Tail Lamp Assembly and /or Backup, Sidemarker, Stop, Turn Signal Bulb Replacement in Lighting Systems.
  4. Close the liftgate.
  5. Inspect for proper engagement of the liftgate bumper.