GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Equinox 🢒 Body 🢒 Seats 🢒 Driver or Passenger Seat Cushion Heater Replacement

Removal Procedure

    Object Number: 987804 Size: SH
  1. Remove the front seat from the vehicle. Refer to Front Seat Replacement - Bucket .
  2. Place the seat on a clean work bench.
  3. Remove the seat cushion cover and pad. Refer to Front Seat Cushion Cover and Pad Replacement .
  4. Gently pull on the heater element to remove the element from the seat foam. Be careful not to damage the foam pad.

Installation Procedure

    Object Number: 987804 Size: SH
  1. Peel off the self-stick tape from the back of the heater element.
  2. Position the heater element over the seat foam pad. Press firmly to engage the adhesive.
  3. Route the heating element wiring harness under the seat pad and connect the harness to the heater module. Secure the wire with tie straps.
  4. Install the seat cushion cover and pad. Refer to Front Seat Cushion Cover and Pad Replacement .
  5. Install the front seat to the vehicle. Refer to Front Seat Replacement - Bucket .