GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Equinox 🢒 Body 🢒 Lighting Systems 🢒 Transmission Floor Shift Control Indicator Lamp Replacement

Removal Procedure
  1. Remove the instrument panel (I/P) trim bezel. Refer to Instrument Panel Accessory Bezel Replacement in Instrument Panel, Gages and Console.
  2. Disconnect the electrical connector from the PRNDL assembly.

    3. Object Number: 1344237 Size: SH
  3. Remove the screws that retain the PRNDL assembly to the I/P bezel. Remove the PRNDL assembly.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1344237 Size: SH
  1. Align the PRNDL assembly with the trim bezel and fasten in place.

    2. Tighten
    Tighten the screws to 2.5 N·m (22 lb in).

  2. Connect the electrical connector to the PRNDL assembly.
  3. Install the I/P trim bezel. Refer to Instrument Panel Accessory Bezel Replacement in Instrument Panel, Gages and Console.
  4. Test the PRNDL assembly for proper operation.