GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Equinox 🢒 Body 🢒 Doors 🢒 Front Side Door Window Belt Outer Sealing Strip Replacement

Removal Procedure

    Object Number: 1378591 Size: SH
  1. Remove the belt seal retaining screw at the rear edge of the door.
  2. Remove the outside rearview mirror. Refer to Outside Rearview Mirror Replacement .
  3. Remove the outer belt seal by lifting up on the seal starting at the rear and working forward.

Installation Procedure

    Object Number: 1378591 Size: SH
  1. Align the outer belt seal fastener location with the hole in the door structure and outer panel retaining tabs.
  2. Starting at the rear of the belt seal, push the belt seal down onto the flange until fully seated.
  3. Install the outside rearview mirror. Refer to Outside Rearview Mirror Replacement .

    4. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the outer belt seal retaining screw.

    5. Tighten
    Tighten the screw to 1.5 N·m (13 lb in).