Exchange of Lighting Control Module (LCM) Fuse and Fuse Label (Export)

THIS SERVICE UPDATE INCLUDES VEHICLES IN DEALER/RETAILER INVENTORY AND CUSTOMER VEHICLES THAT RETURN FOR ANY TYPE OF SERVICE, AND WILL EXPIRE AT THE END OF THE INVOLVED VEHICLE'S NEW VEHICLE LIMITED WARRANTY PERIOD.

This bulletin provides a service procedure to replace the LCM fuse and fuse box label. In case that the passenger compartment lamp (trunk room lamp) drops from its mounting hole by external impact, Battery positive may short-circuit a body ground. LCM (Lighting Control Module) wiring harness may melt because the LCM 30A fuse is not blown.

This service procedure should be completed as soon as possible on involved vehicles currently in dealer/retailer inventory and customer vehicles that return to the dealer/retailer for any type of service during the New Vehicle Limited Warranty coverage period.

A list of involved vehicles currently in dealer/retailer inventory is available on the "Service Update Bulletin Information" link under the "Service" tab in DealerWorld (GM and Saturn US) or attached to the Dealer Communication (Canada) used to release this bulletin. Customer vehicles that return for service, for any reason, and are still covered under the vehicle's base warranty, and are within the VIN breakpoints provided below, should be checked for vehicle eligibility in the appropriate system listed below.

Important: Dealers are to confirm vehicle eligibility prior to beginning repairs by using GMVIS. Not all vehicles within the above breakpoints may be involved.

Parts required to complete this service update are to be obtained from General Motors Service and Parts Operations (GMSPO). Please refer to your "involved vehicles listing" before ordering parts. Normal orders should be placed on a DRO = Daily Replenishment Order. In an emergency situation, parts should be ordered on a CSO = Customer Special Order.

Replace the 30A LCM (Lighting Control Module) fuse in the engine room fuse box to 15A. Attach the new fuse label to the fuse box upper cover in the engine room.

For vehicles repaired under this Service Update, use: