GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Epica 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Driver Seat Adjuster Replacement

Removal Procedure

    Object Number: 1256649 Size: SH
  1. Remove the driver seat. Refer to Front Seat Replacement - Bucket .
  2. Remove the front seat cushion. Refer to Front Seat Cushion Replacement .
  3. Disconnect the electrical connector.
  4. Remove the bolts the screws, and the slide assembly.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1256649 Size: SH
  1. Install the slide assembly with the bolts and the screws.

    2. Tighten

    • Tighten the slide assembly bolts to 25 N·m (18 lb ft).
    • Tighten the slide assembly screws to 10 N·m (89 lb in).
  2. Connect the electrical connector.
  3. Install the front seat cushion. Refer to Front Seat Cushion Replacement .
  4. Install the driver seat. Refer to Front Seat Replacement - Bucket .