Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: LINK Connector End View Reference: LINK | |||
1 | Did you review the Luggage Compartment Description and Operation and perform the necessary inspections? | Go to Step 2 | Go to Symptoms - Body Rear End |
2 | Operate the rear compartment lid release switch. Did the rear compartment lid release? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 |
Did the test lamp illuminate? | Go to Step 7 | Go to Step 4 |
4 |
Did the test lamp illuminate? | Go to Step 11 | Go to Step 5 |
5 |
Did the test lamp illuminate? | Go to Step 6 | Go to Step 10 |
6 | Test the rear compartment lid release actuator switch for continuity when the switch is pressed. Does the switch have continuity when the switch is pressed? | Go to Step 9 | Go to Step 12 |
7 | Test the ground circuit of the rear compartment lid release actuator for continuity. Refer to Circuit Testing and Wiring Repairs. Did you find and correct the condition? | Go to Step 14 | Go to Step 8 |
8 | Inspect for poor connections at the harness connector of the rear compartment lid release actuator. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs. Did you find and correct the condition? | Go to Step 14 | Go to Step 12 |
9 | Inspect for poor connections at the rear compartment lid release actuator switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs. Did you find and correct the condition? | Go to Step 14 | Go to Step 13 |
10 | Repair an open in the rear compartment lid release switch battery feed circuit. Refer to Wiring Repairs. Did you complete the repair? | Go to Step 14 | -- |
11 | Repair an open in the rear compartment lid release actuator feed circuit. Refer to Wiring Repairs. Did you complete the repair? | Go to Step 14 | -- |
12 | Replace the rear compartment lid release actuator. Refer to Rear Compartment Lid Latch Replacement. | Go to Step 14 | -- |
13 | Replace the rear compartment lid release switch. Did you complete the replacement? | Go to Step 14 | -- |
14 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
