Caution: Place a dry chemical (Class B) fire extinguisher near the area before performing a Fuel Tank Leak Check. Before removing the fuel tank for a suspected leak, make sure that the fuel pipes or the tubes are not leaking onto the tank. Once removed, make sure that the fuel is not leaking around the fuel sender O-ring. Failure to follow these precautions may result in personal injury.

1. Remove the fuel tank. Refer Fuel Tank Replacement .
2. Plug the fuel feed hose, the fuel limiter vent valve hose, and the fuel tank vent valve hose on the fuel tank.
3. Plug the fuel filler neck opening.
4. Connect a piece of the hose to the breather hose nipple on the fuel tank and secure the hose with one clamp.
5. Submerge the fuel tank in water or apply a soapy solution to the outside of the tank.
6. Apply 7-15 kPa (1-2 psi) air pressure to the breather hose.
7. Air bubbles appearing from the fuel tank indicate a leak.
8. Replace the fuel tank if the tank is leaking.