GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2004 🢒 Epica 🢒 Suspension 🢒 Front Suspension 🢒 Control Arm Bushing Replacement

Tools Required
    • KM-508-A Remover/Installer
    • KM-307-B Removal Plate or equivalent

Disassembly Procedure

    Object Number: 1255639 Size: SH
  1. Remove the control arm. Refer to Control Arm Replacement .
  2. Remove the control arm rear bushing using a press, the KM-307-B  (1), and a drift.

    3. Object Number: 1255640 Size: SH
  3. Remove the control arm front bushing using a press, the KM-508-A  (1) and the KM-307-B  (2).

Assembly Procedure

    Object Number: 1255641 Size: SH
  1. Coat the control arm rear shaft with a multipurpose lubricant. Refer to Fluid and Lubricant Recommendations in General Information.
  2. Press the control arm front bushing into the control arm using a press, the KM-508-A  (1) and the KM-307-B . Center the bushing.

    3. Object Number: 1255644 Size: SH
  3. Coat the outside of the control arm front bushing and the inside of the control arm with a multipurpose lubricant. Refer to Fluid and Lubricant Recommendations in General Information.
  4. Press the control arm front bushing into the control arm using a press, the KM-508-A  (1), and the KM-307-B  (2). Center the bushing.
  5. Install the control arm. Refer to Control Arm Replacement .