Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
3. Remove the rear portion of the front wheelhouse liner. Refer to Rear Wheelhouse Panel Liner Replacement.

1

Front Fender Ornament Assembly

Tip
Remove the fender ornament from the inside of the wheelhouse opening by releasing the three integral tabs on the inboard side of the front fender ornament.

Preliminary Procedure

Remove the front wheelhouse rear liner assembly. Refer to Front Wheelhouse Liner Replacement.

1

Front Fender Ornament Nut (Qty: 6)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
4 N·m (35 lb in)

2

Front Fender Ornament (Qty: 2)

Tip
Remove either the upper or lower ornament as needed.