GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Corvette 🢒 Transmission 🢒 Manual Transmission - Tremec 6-Speed 🢒 Shift Linkage Adjustment

    Object Number: 180811 Size: SH
  1. Apply the parking brake.
  2. Remove the shift control closeout boot. Refer to Shift Control Shift Closeout Boot Replacement.
  3. Place the shifter into NEUTRAL.
  4. Press down to engage the shift control neutral lock pin.

    5. Object Number: 71526 Size: SH
  5. Loosen the transmission shift rod clamp bolt.
  6. Loosen the shift control mounting bolts.
  7. Check that the shift control locator (on the underside of the shift control) is installed into the shifter bracket on the side of the driveline support assembly.

    8. Caution: Refer to Fastener Caution in the Preface section.

  8. Tighten the shift control mounting bolts.

    9. Tighten
    Tighten the shift control mounting bolts to 30 N·m (22 lb ft).

  9. Tighten the transmission shift rod clamp bolt.

    10. Tighten
    Tighten the transmission shift rod clamp bolt to 30 N·m (22 lb ft).


    Object Number: 180816 Size: SH
  10. Lift to release the shift control neutral lock pin.
  11. Install the shift control closeout boot. Refer to Shift Control Shift Closeout Boot Replacement.
  12. Release the parking brake.